The Assistant is the chat panel in your timeline. Describe the edit you want and it builds a timeline, then keep chatting to refine it.
How you word that first message shapes what you get back. For phrasing that works, see How to write prompts for AI editing in Selects.
Note: Chatting with the Assistant uses Selects credits.
Start the edit
When you open a new project, the chat is empty and ready. Type what you want done. If chat needs to analyze your footage first, it asks you to confirm the credits before anything runs, unless you have set [Permissions] to [Bypass]. You can also start from the Home screen: describe your video in the chat box there, and Selects creates the project and sends your message as the first one.
To build your timeline by hand instead, see Start from scratch: creating a timeline manually.
Build a timeline in chat
To build a timeline in chat, tell the agent what you want. Your timeline appears when it is ready, and you can keep chatting to refine it.
For help wording a request, see How to write prompts for AI editing in Selects.
Once you have a timeline, you can also review it by leaving notes on it as you watch and sending them to chat in one batch. See Review a timeline with comments.
When you ask chat to export, it first shows you the finished timeline and asks whether to export now or adjust it first.
What you can ask for
What you can ask for covers six kinds of work. You do not pick between them, you just describe what you want and Selects uses the right one.
Assemble and cut: put your sources on a timeline, then shape them into a finished edit. Ask for a storyline, a target length, or a highlight pass.
Pacing and speech flow: silences, pauses, dead air, filler words, repeated words, and jump cuts. Ask qualitatively with gentle, normal, tight, or jump cut, or give exact timings and it follows those instead.
Cut to a script: give it your script and it matches each line to what was actually recorded, on the take you meant, in script order.
Picture-led edits: find and assemble by what is on screen, including subjects, actions, expressions, locations, and shot order. Useful for montages, shot lists, and B-roll.
Clean up blurry or shaky shots: checks your footage for the shaky and out of focus stretches, then clears them off a timeline. Scanning is not part of analysis, so if it has not run yet, chat runs it first. See Find shaky and blurry shots.
Organize your footage: sorts your sources into Main and B-roll folders, or any layout you name. It creates the folders it needs and moves your files into them, and never deletes your files.
Note: On multicam footage, a blur cleanup switches to a clean angle showing the same person rather than cutting the moment out. It only removes footage when there is one camera, or when no other angle is clean there.
Tip: You can attach a screenshot of a folder layout from another editor or from Finder and ask Selects to match it. It reads the folder names and file placement from the image, and tells you anything it could not match.
Chat also handles sound, captions, and footage from your other projects. Some requests to try:
"Add captions in a style that suits my Short"
"Clean up the clicks, lip smacks and breaths in the pauses"
"Reduce the background noise on this clip"
"Set my exported video to YouTube loudness"
"Remove the coughs"
"Bring in the footage from my other project called Interview Day 2"
Captions chat adds are the same captions the Captions app makes, so you can keep editing them there. Chat picks a caption look that suits your video, checks a few frames to make sure the captions read clearly, then offers other looks you can switch to. For a look made just for this video, ask chat to design one, for example "Design a new caption style for this video". Chat shows a few designs on your own frames for you to choose from.
Attach a script or an image
You can attach a script or an image to any message. Click [+] in the chat input and choose [Attach a file], or drag the file straight onto the composer.
Scripts: .txt, .md, .docx, .pdf, and .srt.
Images: PNG, JPEG, GIF, and WebP, up to 50 per message.
You can attach up to 50 files to one message. Script files must be under 10 MB, and scripts must be under 45,000 characters, not counting timestamps. You can also paste a script straight into the input. Long pastes turn into an attachment chip showing the first line and the character count.
If a file is empty, an unsupported type, or unreadable, Selects tells you which so you can fix it. Scanned or image-only documents cannot be read as scripts.
Draw on the frame to show chat what you mean
To point at something on screen, draw on the frame and send it to chat. This works while a timeline or a synced timeline is open with its preview showing.
In the preview toolbar, click [Frame actions] and choose [Draw on frame]. If the toolbar shows a pen button instead, click it. Playback pauses.
Draw on the preview to circle or mark what you mean.
Click [Send to chat]. The marked frame is added to your message as an image.
Type your request, for example "make this part brighter", and send it.
To start over, click the eraser ([Clear]) under the frame. To put the pen away without sending, press Esc or click the X.
In [Comments] mode, your drawing is attached to your next comment instead of a chat message. Learn more in Review a timeline with comments.
A quick drawing often says more than a sentence. Some ways to use it:
Move or resize something: circle a clip, title, or logo, mark where it should go, and ask "move this here" or "make this smaller".
Mask or crop out a distraction: mark the spot instead of describing it, for example a person showing in the bottom right corner, and ask chat to mask or crop it out.
Use a scene as a reference: mark a frame you like and ask chat to match other parts of your edit to it, for example "make the other shots look like this".
Fix or generate AI footage: mark what to change in an AI-generated clip, or ask chat to generate new footage based on the marked frame. Generating uses Selects credits.
Point the agent at a specific timeline or folder
To point the agent at something specific, type @ in the chat input and pick it from the list. You can mention a video or audio file, a timeline, a synced timeline, or a folder. It saves describing which timeline you mean when a project has several.
You can also mention clips straight from your timeline:
Select one or more clips on a timeline or a synced timeline.
Right-click the selection and choose [Mention in chat].
Chat opens with each clip added to your message as an @ mention. Finish your request and send it.
While the agent is working
While the agent is working, Selects shows you its progress. The send button turns into a stop button, so click that to cancel.
If the model stops responding or the connection drops, chat tries again on its own. The progress line shows which try it is on, for example "Retrying model response (1/3)…", and why, such as "The model provider is busy". If nothing new arrives for a while, it also shows how long it has been waiting.
Your timeline stays editable while chat works. A synced timeline locks only while chat is making changes to it, and you can edit it again once chat finishes.
Send more messages while it works
You can send more messages while the agent works. Type your next message, then press Enter or click the send button, which takes the place of the stop button while you type. Your message waits at the end of the chat and sends on its own when the current reply finishes.
You can still change a waiting message before it sends:
Click [Send now] under it to add it to the reply in progress. This cannot be undone.
Hover over it and click the X to move it back into the chat input and edit it.
Clicking the stop button keeps your waiting messages, but they no longer send on their own. Click [Send now] to send one as a new message.
Note: Sending while a reply runs needs the latest version of Selects. Not every chat can hold messages yet, for example when you chat on your own Claude subscription. If the stop button stays when you type, wait for the reply to finish before you send your next message.
If a request fails
If a request fails, the error message above the chat input shows [Retry]. Click it to send your last message again without retyping it. Attached files are not sent again, so attach them again if the request needs them. If the agent had already done part of the work when the request stopped, the message shows [Continue] instead. What was done is kept, and [Continue] picks up the rest. An out-of-credits message shows its own next step instead of [Retry].
Manage your chats
You can keep several chats going per project, so you never have to clear one to start another.
[New chat], at the top of the chat list, starts an extra chat alongside the ones you already have.
The back arrow at the top of the panel opens your chat list for this project. Pick any chat to carry on where you left off.
Bring back a message you sent
To edit and resend a message you already sent, press the up arrow while the chat input is empty. The message comes back into the input, ready to change. Press the up arrow again to go further back, or the down arrow to come forward. If a message is waiting to send, the up arrow brings that one back first, with its attachments.
Find a message in a chat
To search the open chat, click anywhere in the chat panel, then press Cmd+F (Ctrl+F on Windows). A search field replaces the chat title. Type a word to highlight every match. Press Enter to go to the next match or Shift+Enter to go back, and press Escape to close the search.
Note: If scene search is open, Cmd+F goes there instead. Close scene search first, then click in the chat panel and try again.
Save how you work as a skill
Anything you find yourself repeating to chat can be saved as a skill: how you switch between cameras, how long you like your cuts, how you name timelines and organize your files. Ask chat to save it, and later projects pick it up without you explaining again.
Chat replies with a link to what it saved, so you can read it back. To change a skill, tell chat what to adjust.
Note: This is early. Skills are saved, applied, and changed through chat, and there is no separate screen for browsing or managing them yet.
Choose a model
To choose a model, click the model name at the bottom right of the chat input. The menu groups models by who pays for the conversation.
[Use Selects credits]: chat on a model built into Selects and pay with your Selects credits. Hover the model shown to pick another one, grouped under [ChatGPT] and [Claude], then hover a model to set its effort, from [Max] down to [Low]. Click a model to run it at its default effort, marked [Default]. The models on offer may change.
Connected plan: connect the Claude or ChatGPT subscription you already pay for, and chat in Selects on that plan instead of spending Selects credits. Connect it first, see Which AI setup should you use in Selects?
When you chat on a plan or API key you connected, the menu opens straight to that provider's models. Click [View more] at the bottom to see the rest of the menu, including [Use Selects credits].
[Credits] sits at the bottom of the [Use Selects credits] model list. Hover it to see how much of your credits you have used, without leaving the chat. It shows a percentage and the credits used out of your total, for example 32% used (1,140 / 3,600).
Tip: [Connect MCP] sits at the top of this menu. It lets you drive Selects from your own AI agent instead of this chat. See Connect Selects to your AI agent with the Selects MCP.
Choose chat permissions
To choose how much chat checks with you while it works, open the model menu and hover [Permissions], the last item. If the menu opens on your connected provider's models, click [View more] first. [Permissions] shows the mode in use, and [Ask] is the default.
[Ask]: asks questions, and before paid actions. Chat asks you whenever it needs a decision, and waits for your OK before anything that uses credits, such as analyzing footage or generating media.
[Auto]: automatically accepts all, except paid actions. Chat answers its own questions with the option it recommends and keeps working, but still asks before anything that uses credits.
[Bypass]: never asks. Chat answers its own questions and also approves paid actions for you, so it can use credits without checking with you first. A message lets you know each time it approves one.
When chat asks before a paid step, the card shows what that step costs. Chat doesn't quote prices in its replies, so check the card for the cost.
Credits
Chatting with the Assistant uses Selects credits when you pick a model under [Use Selects credits].
There is no fixed price per message. How many credits a conversation uses depends on how long it runs and how much footage the agent has to read, so a quick question costs far less than a full edit built from hours of footage.
Analyzing your footage always uses credits, whichever model you chat on. See How AI analysis works in Selects and Selects app: plans and pricing.
If you are not sure which way suits you, see Which AI setup should you use in Selects?
Bring your own subscription (BYOS)
If you already pay for Claude or ChatGPT, you can connect that subscription and chat in Selects without spending Selects credits on the conversation. Selects runs the model against your own plan instead.
This is usually the cheaper way to chat, because a flat monthly Claude or ChatGPT plan costs less per message than the paid API access behind the Selects models.
Connecting takes about a minute and only has to be done once. For the setup steps, see Which AI setup should you use in Selects?
Once you are connected, picking a model from [Use Selects credits] switches that conversation back to Selects credits. Selects first asks "Switch to Selects credits?": click [Use Selects credits] to switch, or [Cancel] to stay on your plan. It does not sign you out, so you can move between the two whenever you like.
FAQs
Does chatting with the Assistant use credits?
Yes. Chatting with the Assistant uses Selects credits when you pick a model under [Use Selects credits]. If you bring your own Claude or ChatGPT subscription, chatting does not use Selects credits, because your own plan covers the conversation instead. Analyzing your footage uses credits either way.
How many credits does one chat use?
There is no set number of credits per chat or per message. What a conversation uses depends on how long it runs and how much footage the agent has to read to answer you, so asking for a full edit from a day of footage uses far more than a small trim. Hover [Credits] at the bottom of the [Use Selects credits] model list to see how much you have used while you work.
Do I need to bring my own AI subscription, such as Claude or ChatGPT, to use chat in Selects?
No. Bringing your own AI subscription, such as Claude or ChatGPT, is optional. Selects includes its own models under [Use Selects credits], so you can chat and build timelines without paying for anything else.
Why does it say my Claude subscription hit a rate limit?
The message "Claude rate-limited this request" means you have hit the usage limit on your own Claude plan, not a Selects limit. Wait for your Claude limit to reset, switch to a lighter Claude model, or pick a model under [Use Selects credits] to keep working.
Why does it say I've reached my ChatGPT plan's usage limit?
The message "You've reached your ChatGPT plan's usage limit" means you have used up the limit on your own ChatGPT plan, not a Selects limit. Sending the message again won't work until the limit resets, so this error has no [Retry]. Wait for your ChatGPT limit to reset, or pick a model under [Use Selects credits] to keep working. You need the latest version of Selects to see this message.
What if my Claude connection expires?
When your Claude sign-in expires, the error message above the chat input shows [Reconnect Claude]. Click it to connect Claude again, then send your message again.






